Clamping Sleeve

Clamping sleeve from Precise Jagen

With this multi-solution, one part (the clamping sleeve) is screwed firmly onto the daylight optics.
The counterpart, the connector, is screwed tightly onto the attachment. The design of the five locking lugs creates an absolutely bulletproof and repeatable connection between the two parts.
This allows you to achieve the highest level of repeatability in aligning the attachment to the rifle scope.

The handling is still simple and can be done easily even with gloves in the dark.
With the DUO connector you can use the attachment alternately on different rifle scope diameters without any modification.
This enables unimagined flexibility!

This clamping sleeve is intended for mounting on a daylight lens with an outer diameter of 62 mm on the lens housing. Many “56” glasses have this diameter.
It is pushed over the lens over a length of 45 mm and screwed in place with the 4 screws.
It remains permanently on the daylight optics. A protective film is placed on the contact surfaces of the lens, which prevents damage to the lens and increases adhesion.
This means that the clamping sleeve and thus the attachment are not removed from the rifle scope, even with powerful calibers.

A special inner contour ensures precise alignment of the attachment. The toothing on the front side is the basis for absolutely repeatable alignment of an attachment.

IMPORTANT: Please measure your outer diameter of the lens to choose the correct size - the lens size is not important.

Scope of Delivery:

• Clamping Sleeve
• ATTENTION: duo connector additionally required if not available
  A torque wrench is required for assembly – this is not included in delivery!